LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P057E-00: Brake Pedal Position Sensor >> Component Inspection >> Stop Lamp Relay (Without Led Rear Combination Lamps)

Stop Lamp Relay (Without Led Rear Combination Lamps)

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STOP LAMP RELAY 
    1. Turn the ignition switch OFF.
    2. Disconnect stop lamp relay connector E12.
    3. Check stop lamp relay.
      G04889330Courtesy of NISSAN NORTH AMERICA, INC.

      Rear window defogger relay terminals

      Condition

      Continuity

      3

      5

      12V direct current supply between terminals 1 and 2.

      Yes

      No current supply

      No

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace stop lamp relay.