LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P057E-00: Brake Pedal Position Sensor >> Component Inspection >> ASCD Cancel Switch

ASCD Cancel Switch

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ASCD CANCEL SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect ASCD cancel switch connector E89.
    3. Check the continuity of ASCD cancel switch.

      ASCD cancel switch terminals

      Condition

      Continuity

      1 - 2

      ASCD cancel switch ON

      (Brake pedal depressed)

      Yes

      ASCD cancel switch OFF

      (Brake pedal released)

      No

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace the ASCD cancel switch. Refer to Removal and Installation .