LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0524-00: Engine Oil Pressure >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for DTC P0524-00 being current or past on the CONSULT screen.

    Is DTC P0524-00 detected?

    YES

    Refer to Lubricating Oil Pressure Low or Lubricating Oil Pressure High.

    NO

    GO TO 2 .

  2. ERASE DTC 
    1. Connect all components.
    2. Turn ignition switch ON.
    3. Using CONSULT erase ENGINE diagnostic trouble codes.
    4. Perform "DTC CONFIRMATION PROCEDURE".

    Is P0524-00 DTC current?

    YES

    Return to the diagnosis procedure steps if all steps have been completed and checked again.

    NO

    Repair complete.

scientia non olet · About LEMON Manuals