LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0461-00: Fuel Level Sensor >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for DTC P0461-00 being current on the CONSULT screen.

    Is DTC P0461-00 detected as current?

    YES

    GO TO 2 .

    NO

    Refer to Intermittent Incident .

  2. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for CAN DTCs being current on the CONSULT screen.

    Is applicable DTC detected as current?

    YES

    Refer to DTC Index .

    NO

    GO TO 3 .

  3. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for DTC P0462-00 or P0463 being current on the CONSULT screen.

    Is applicable DTC detected as current?

    YES

    Refer to DTC Index .

    NO

    GO TO 4 .

  4. CHECK FUEL LEVEL 
    1. Turn ignition switch ON engine OFF.
    2. Check for adequate fuel supply; verify there is fuel in the tank.
      NOTE: Do not rely on the vehicle's fuel gauge.

    Is the inspection result normal?

    YES

    Replace the fuel level sensor. Refer to Removal and Installation .

    NO

    Add fuel to the fuel tank.

scientia non olet · About LEMON Manuals