LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0384-00: Glow Plug Control Module Control Circuit High >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The glow plug control module supply voltage was greater than 16V.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0384-00

GLOW PLUG CONTROL MODULE 1 CONTROL CIRCUIT HIGH

(Glow Plug Control Module Control Circuit High)

Diagnosis condition

Ignition switch is ON or engine running

Signal (terminal)

(-)

Threshold

Glow plug control module supply voltage > 16V

Diagnosis delay time

Diagnostic runs continuously when the ignition is ON or engine is running