DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The Engine Control Module (ECM) detected a loss of the camshaft speed/position sensor while the engine was running.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0340-00 |
CMP_SEN/CIRCUIT (Camshaft Position Sensor "A" Circuit) |
Diagnosis condition |
Engine running |
|
Signal (terminal) |
Camshaft position (168) |
||
|
Threshold |
Detected when no camshaft signal is present and crankshaft signal is valid over calibrated threshold. |
||
|
Diagnosis delay time |
Diagnostic runs continuously when engine is running |
||