LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0335-00: CKP Sensor (Pos) >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0335-00

CKP SEN/CIRCUIT

(Crankshaft position sensor "A" circuit)

Diagnosis condition

Ignition switch ON

Signal (terminal)

Crankshaft position sensor (POS) signal

Threshold
  • The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
  • The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
  • The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.

Diagnosis delay time

-
scientia non olet · About LEMON Manuals