LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Wheels & Tires (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION 

    SYMBOL CONSULT

    1. Drive for several minutes at a speed of 40 km/h (25 MPH) or more.
    2. Stop the vehicle.
    3. Select "Self Diagnostic Result" mode of "AIR PRESSURE MONITOR".
    4. Check DTC.

    Is DTC "U1000" detected?

    YES

    Proceed to Diagnosis Procedure .

    NO

    Prior to repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: Inspection End.