Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.

Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTCs
Register TPMS sensor IDs

PERFORM LOW TIRE PRESSURE WARNING CONTROL UNIT SELF-DIAGNOSIS
1. Replace applicable tire pressure sensor. Refer to Tire Pressure Sensor .
2. Select "Self Diagnostic Result" mode of "AIR PRESSURE MONITOR".
3. Check DTC.
Is DTC "C1761", "C1762", "C1763", or "C1764" detected?

YES

Replace low tire pressure warning control unit. Refer to Removal and Installation .

NO

Inspection End.