LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Automatic Transmission (DTC/Circuit Diagnosis) (Re6R01A)) >> DTC/Circuit Diagnosis >> Shift Lock System >> Component Inspection (Stop Lamp Relay)

Component Inspection (Stop Lamp Relay)

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STOP LAMP RELAY 

    Check continuity between stop lamp relay terminals.

    CAUTION: Connect the fuse between the terminals when applying the voltage.

    Stop lamp relay connector

    Condition

    Continuity

    Terminal

    3

    5

    Apply 12 V direct current between terminals 1 and 2.

    Yes

    OFF

    No

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace stop lamp relay.

scientia non olet · About LEMON Manuals