LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Automatic Transmission (DTC/Circuit Diagnosis) (Re6R01A)) >> DTC/Circuit Diagnosis >> DTC P279D: 4WD Range Signal >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONNECTOR 

    Check the metal deposition, damage, and corrosion of connectors (F213 and E73 and E74).

    Is the inspection result normal?

    YES

    GO TO 2 .

    NO

    Repair or replace malfunctioning parts.

  2. CHECK DTC OF TRANSFER CONTROL UNIT 
    1. Turn ignition switch ON.
    2. Perform "Self Diagnostic Results" in "ALL MODE AWD/4WD".

    Is any DTC detected?

    YES

    Check DTC detected item. Refer to DTC Index .

    NO

    GO TO 3 .

  3. CHECK DTC OF TCM 

    Perform "Self Diagnostic Results" in "TRANSMISSION".

    Is any DTC other than "P279D" detected?

    YES

    Check DTC detected item. Refer to DTC Index .

    NO

    INSPECTION END