DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Always drive vehicle at a safe speed.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 25 seconds before performing the next test.

GO TO 2 .

PERFORM DTC CONFIRMATION PROCEDURE

Clear the DTC.
Start the engine.

Drive vehicle and maintain the following conditions for at least 10 seconds.

Vehicle speed

: 56 km/h (34MPH) or more

Stop the vehicle.
Check the 1st trip DTC.

Is "P0717" detected?

YES

Refer to Diagnosis Procedure .

To check malfunction symptom before repair: Refer to Intermittent Incident .

Confirmation after repair: INSPECTION END