LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Seat) >> Unit Disassembly And Assembly >> Rear Seat >> Seat Cushion >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat cushion assembly. Refer to Removal and Installation .
  2. Remove the hog rings from the bottom of the seat cushion pad and trim.
    CAUTION: Remove all pieces of hog rings and discard them.
  3. Release the hook and loop fasteners from the top of the seat cushion.
  4. Separate the seat cushion trim from the seat cushion pad.
scientia non olet · About LEMON Manuals