Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is in the reverse order of disassembly.

Install new hog rings on the seat cushion trim in original positions.

Courtesy of NISSAN NORTH AMERICA, INC.
Use only one hog ring in each designated location.
Make sure hog rings are correctly fastened around both the seat cushion trim and seat cushion pad wires.
Use NISSAN standard hog rings and tools to assemble.
When installing the seat cushion trim, firmly push down while sliding your hand along the seams as shown below to ensure the hook fasteners below the seat cushion trim are fastened properly.

Courtesy of NISSAN NORTH AMERICA, INC.