LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Transfer Case (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Detecting error during the initial diagnosis of CAN controller of transfer control unit.

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detecting condition

U1010

CONTROL UNIT (CAN)

[Control unit (CAN)]

Diagnosis condition

Ignition switch: ON

Signal

-

Threshold

Error detected during the initial diagnosis of CAN controller of transfer control unit.

Diagnosis delay time

Within 1 second