Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK RANGE SENSOR
- Turn the ignition switch OFF.
- Remove range sensor. Refer to Removal and Installation .
- Check the continuity between range sensor harness connector terminals.
Range sensor
Condition
Continuity
Terminal
1
3
While pushing switch of range sensor.
Existed
Other than the above.
Not existed
2
3
While pushing switch of range sensor.
Existed
Other than the above.
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace range sensor. Refer to Removal and Installation .