Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK 4WD SHIFT SWITCH
Check 4WD shift switch. Refer to Component Inspection .
Is the inspection result normal?
YES
GO TO 2 .
NO
Replace 4WD shift switch. Refer to Removal and Installation .
- CHECK 4WD SHIFT SWITCH CIRCUIT (1)
- Disconnect transfer control unit harness connector.
- Check the continuity between transfer control unit harness connector and 4WD shift switch harness connector.
Transfer control unit
4WD shift switch
Continuity
Connector
Terminal
Connector
Terminal
E142
18
M141
3
No
4
Yes
6
No
7
No
19
3
No
4
No
6
Yes
7
No
20
3
No
4
No
6
No
7
Yes
Is the inspection result normal?
YES
GO TO 3 .
NO
Repair or replace error-detected parts.
- CHECK 4WD SHIFT SWITCH CIRCUIT (2)
Check the continuity between 4WD shift switch harness connector and ground.
4WD shift switch
-
Continuity
Connector
Terminal
M141
4
Ground
No
6
7
Is the inspection result normal?
YES
Replace transfer control unit. Refer to Removal and Installation .
NO
Repair or replace error-detected parts.