Component Inspection (Active Grille Shutter)
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ACTIVE GRILLE SHUTTER
With CONSULT
- Start engine.
- On CONSULT screen, select "ENGINE">>"ACTIVE TEST">>"ACTIVE GRILLE SHUTTER".
- Touch "CALIBRTN".
- After the calibration completes, check the operation of active grille shutter as follows.
Condition
Active grille shutter
Select "CLOSE"
Close → Open
Select "OPEN"
Open → Close
Without CONSULT
- Turn ignition switch OFF.
- Operate shutter by hands to close position.
- Check the operation of active grille shutter as follows.
Condition
Active grille shutter
Ignition switch: ON
Close → Open
Is the inspection result normal?
YES
INSPECTION END
NO
Replace active grille shutter. Refer to Removal and Installation .