Removal and Installation: VK56VD: Installation

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Hand-tighten bolts, then torque to specification.

Torque generator rear bracket (1) bolts in the sequence shown.

Courtesy of NISSAN NORTH AMERICA, INC.

Generator rear bracket bolts

: 61.3 N.m (6.3 kg-m, 45 ft-lb)

Hand-tighten terminal bolt (1) and terminal nut (2), then torque to specification.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Tighten terminal nut and bolt carefully.

Terminal nut	: 11.0 N.m (1.1 kg-m, 8 ft-lb)
Terminal bolt	: 4.0 N.m (0.41 kg-m, 3 ft-lb)