Removal and Installation: Cummins 5.0L: Installation
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- Hand-tighten generator bracket bolts, then tighten to specified torque. This model includes the variable voltage control system. Be sure to inspect the variable voltage control system after replacing the generator to ensure the system operates normally.
- Hand-tighten generator bolts, then tighten to specified torque.
- Hand-tighten terminal nut (B) and bolt (C), then tighten to specified torque.
CAUTION:
Tighten terminal nut carefully.
|
Terminal nut Terminal bolt |
: 11.0 N.m (1.1 kg-m, 8 ft-lb) : 4.46 N.m (0.45 kg-m, 39 in-lb) |