CONSULT Function: Configuration

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Configuration includes functions as follows.

Function		Description
Read / Write Configuration	Before Replace ECU	Reads the vehicle configuration (Type ID) of current 3CH CAN gateway. Saves the read vehicle configuration (Type ID).
	After Replace ECU	Writes the vehicle configuration (Type ID) with saved data.
Manual Configuration		Writes the vehicle configuration (Type ID) with manual selection.

CAUTION: Follow the instructions listed below. Failure to do this may cause malfunctions to the 3CH CAN gateway.:

When replacing 3CH CAN gateway, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
If incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
Never perform "Read / Write Configuration" or "Manual Configuration" except for new 3CH CAN gateway.