DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
1. Turn ignition switch ON.
2. Perform "Self Diagnostic Result" mode of "HVAC".
3. Check DTC.
NOTE:
- If DTC is displayed along with DTC U1000 or U1010, first diagnose the DTC U1000 or U1010. Refer to DTC Description or DTC Description .
- Sunload sensor may register a malfunction when indoors, at dusk, or at other times when light is insufficient. When performing the diagnosis indoors, light the sunload sensor with a lamp (60W or more).
Is DTC "B2630" or "B2631" displayed?

YES

Perform trouble diagnosis for the sunload sensor. Refer to Diagnosis Procedure .

NO

Inspection End.