Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Follow the "General Precautions" before working on the fuel system. Refer to General Precautions .

NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.

Remove the fuel tank. Refer to Removal and Installation .
Remove the lock ring using Tool.

Tool number

: KV101207S0 (-)
Remove the fuel level sensor, fuel filter and fuel pump assembly. Remove and discard the O-ring.
CAUTION:
- Do not bend the float arm during removal.
- Avoid impacts such as dropping when handling the components.
- Do not reuse O-ring.