LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Fuel System (5.6L)) >> Removal And Installation >> Fuel Level Sensor Unit And Fuel Pump Assembly >> Inspection

Fuel Level Sensor Unit And Fuel Pump Assembly: Inspection

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Use the following procedure to check for fuel leaks:

  1. Turn ignition switch "ON" (with engine stopped) then check connections for leaks by applying fuel pressure to fuel piping.
  2. Start engine. Then let it idle and check that there are no fuel leaks at the fuel system connections.