LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Fuel System (5.6L)) >> Removal And Installation >> EVAP Canister >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left rear tire. Refer to Removal and Installation .
  2. Disconnect the EVAP hose from the EVAP canister. Refer to Exploded View .
  3. Remove EVAP canister protector and EVAP canister bolt.
  4. Disconnect the harness connector from the EVAP control system pressure sensor.
  5. Disconnect the EVAP canister purge hose from the EVAP canister.
  6. Disconnect the harness connector from the EVAP canister vent control valve.
  7. Disconnect the EVAP canister control valve hose from the EVAP canister vent control valve.
  8. Remove the EVAP canister bolt.
  9. Remove the EVAP canister.
scientia non olet · About LEMON Manuals