Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FRONT WIPER STOP POSITION SIGNAL
CONSULT
- Select "WIP AUTO STOP" in "Data Monitor" mode of "IPDM E/R".
- Operate the front wiper.
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
Monitor status
WIP AUTO STOP
Front wiper motor
Stop position
STOP P
Except stop position
ACT P
Is the status of item normal?
YES
Front wiper stop position signal circuit is normal.
NO
Refer to Diagnosis Procedure .