LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Exterior Lighting System - Halogen Headlamp (Circuit Diagnosis)) >> Circuit Diagnosis >> Hazard Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HAZARD SWITCH SIGNAL WITH CONSULT 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Select "FLASHER" in "Data Monitor" mode of "BCM".
    3. While operating the hazard switch, check the monitor status.

    Monitor item

    Condition

    Monitor status

    HAZARD SW

    Hazard switch

    ON

    On

    OFF

    Off

    Is the inspection result normal?

    YES

    Hazard switch circuit is normal.

    NO

    Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals