LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (Heater & Air Conditioning Control System - Manual Air Conditioner) >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> Air Mix Door Motor >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK AIR MIX DOOR MOTOR POWER SUPPLY 
    1. Turn ignition switch ON.
    2. Check voltage between air mix door motor harness connector and ground.

    (+)

    (-)

    Voltage

    (Approx.)

    Air mix door motor

    Connector

    Terminal

    M230

    1

    Ground

    Battery voltage

    Is the inspection result normal?

    YES

    GO TO 2 .

    NO

    GO TO 4 .

  2. CHECK AIR MIX DOOR MOTOR GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect air mix door motor connector.
    3. Check continuity between air mix door motor harness connector and ground.

      Air mix door motor

      (-)

      Continuity

      Connector

      Terminal

      M230

      2

      Ground

      Yes

    Is the inspection result normal?

    YES

    GO TO 3 .

    NO

    Repair harness or connector.

  3. CHECK INSTALLATION OF AIR MIX DOOR MOTOR 

    Check air mix door motor is properly installed. Refer to Exploded View .

    Is the inspection result normal?

    YES

    Replace air mix door motor. Refer to Removal and Installation - Air Mix Door Motor .

    NO

    Repair or replace malfunctioning part.

  4. CHECK AIR MIX DOOR MOTOR POWER SUPPLY CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect air mix door motor connector and front air control connector.
    3. Check continuity between air mix door motor harness connector and front air control harness connector.

      Air mix door motor

      Front air control

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M230

      1

      M132

      13

      Yes

    Is the inspection result normal?

    YES

    Replace front air control. Refer to Removal and Installation .

    NO

    Repair harness or connector.