Component Inspection (Front Blower Relay)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FRONT BLOWER RELAY

Turn ignition switch OFF.
Remove front blower relay.

Check continuity between front blower relay terminals 3 and 5 when voltage is supplied between terminals 1 and 2.

Courtesy of NISSAN NORTH AMERICA, INC.

Terminals		Voltage	Continuity
3	5	ON	Yes
		OFF	No

Is the inspection result normal?

YES

Inspection End.

Replace front blower relay.