LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Can System) >> Can >> DTC/Circuit Diagnosis >> Main Line Between RDR-R And RDR-L Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONNECTOR 
    1. Turn the ignition switch OFF.
    2. Disconnect the battery cable from the negative terminal.
    3. Disconnect the harness connector C23 and C108.
    4. Check the continuity between the harness connectors.

      Connector No.

      Terminal No.

      Terminal No.

      Continuity

      C108

      1

      6

      Existed

      7

      12

      Existed

    Is the inspection result normal?

    YES

    Check CAN system type decision again.

    YES

    Error was detected in the main line between the side radar RH and the side radar LH.

    NO

    Repair the main line between the harness connector C108.

scientia non olet · About LEMON Manuals