LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Can System) >> Can >> DTC/Circuit Diagnosis >> Main Line Between AVM And Diff Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HARNESS CONTINUITY (OPEN CIRCUIT) 
    1. Turn the ignition switch OFF.
    2. Disconnect the battery cable from the negative terminal.
    3. Disconnect the harness connector M40 and B69.
    4. Check the continuity between the harness connectors.

      Connector No.

      Terminal No.

      Continuity

      B69

      26J

      42J

      Existed

      16J

      32J

      Existed

    Is the inspection result normal?

    YES

    Check CAN system type decision again.

    YES

    Error was detected in the main line between the around view monitor control unit and the differential lock control unit.

    NO

    Repair the main line between the harness connector B69.

scientia non olet · About LEMON Manuals