LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (ADAS Control Unit (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM THE SELF DIAGNOSTIC RESULT 

    SYMBOL CONSULT

    1. Turn the ignition switch ON.
    2. Turn the Blind Spot Warning system ON, and then wait for 30 seconds or more.
    3. Perform "All DTC Reading" mode.
    4. Check if "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "U1000" detected as the current malfunction?

    YES

    Refer to Trouble Diagnosis Flow Chart .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals