LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Parking Brake System) >> Removal And Installation >> Parking Brake Shoe >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Clean brakes with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
  • Clean dust on disc brake rotor and back plate using a vacuum dust collector. Do not blow with compressed air.
  1. Remove rear wheels and tires using a power tool. Refer to Removal and Installation .
  2. Remove disc brake rotor. Refer to Removal and Installation .
    CAUTION:
    • Parking brake must be in the completely released position.
    • Put matching marks on both disc brake rotor and wheel hub when removing disc brake rotor.
  3. If disc brake rotor cannot be removed, remove as follows:
    1. Secure disc brake rotor with wheel nuts and remove adjuster hole plug.
    2. Using a suitable tool, rotate adjuster in direction shown to retract and loosen brake shoe.
      GNSALFIA0631Z-631Courtesy of NISSAN NORTH AMERICA, INC.

      (A)

      :RH

      (B)

      :LH

      SYMBOL :

      Front
  4. Remove anti-rattle pins, retainers, anti-rattle springs, return spring and adjuster spring.
    CAUTION: Do not drop the removed parts.
  5. Remove parking brake shoes, adjuster, and toggle lever.
    CAUTION:
    • The parking brake shoes for the front side are made of different materials from those for the rear side. Do not misidentify them when removing.
    • Do not drop the removed parts.
scientia non olet · About LEMON Manuals