Diagnostic Procedure
- CHECK DIFF LOCK INDICATOR LAMP
Confirm the DIFF LOCK indicator lamp proves out when ignition switch is turned ON.
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Go to Component Function Check .
- CHECK SELF-DIAGNOSTIC RESULTS
Select "Self Diagnostic Result" mode of "DIFF LOCK". Refer to CONSULT Function .
Is any DTC detected by self-diagnosis?
YES
Check the malfunctioning system. Refer to DTC Index .
NO
GO TO STEP 3 .
- CHECK DIFFERENTIAL LOCK MODE SWITCH OPERATION
Check differential lock mode switch. Refer to Diagnosis Procedure .
Is the inspection result normal?
YES
GO TO STEP 4 .
NO
Repair component, harness or connector.
- CHECK DIFFERENTIAL LOCK CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT
Check differential lock control unit power supply and ground circuit. Refer to Diagnosis Procedure .
Is the inspection result normal?
YES
Replace the differential lock control unit. Refer to Removal and Installation .
NO
Repair harness or connector.