Physical Values

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	-	Signal name	Input/Output
1 (Y)	Ground	Differential lock solenoid (+)	Output	Ignition switch: ON	Differential lock mode switch: ON	Battery voltage
					Differential lock mode switch: OFF	0 V
2 (V)	Ground	Differential lock solenoid (-)	Input	Ignition switch: ON	Differential lock mode switch: ON	0 V
					Differential lock mode switch: OFF	Battery voltage
5 (G/O)	Ground	Differential lock mode switch (ON)	Input	Ignition switch: ON	Differential lock mode switch: ON	Battery voltage
					Differential lock mode switch: OFF	0 V
7 (P)	Ground	Ignition signal	Input	Ignition switch: ON		Battery voltage
				Ignition switch: OFF		0 V
8 (L)	-	CAN-high	Input/Output	-		-
9 (BR)	Ground	Power supply for solenoid	Input	Always		Battery voltage
10 (B)	Ground	Ground	-	Always		0 V
11 (B)	Ground	Ground	-	Always		0 V
12 (L)	Ground	Differential lock position switch	Input	Ignition switch: ON	Differential lock system: Lock mode (Differential lock indicator lamp: ON)	0 V
					Differential lock system: Unlock mode (Differential lock indicator lamp: OFF)	Battery voltage
					Differential lock standby condition (Differential lock indicator lamp: Flash)	Battery voltage
14 (O)	Ground	Differential lock mode switch (OFF)	Input	Ignition switch: ON	Differential lock mode switch: ON	0 V
					Differential lock mode switch: OFF	Battery voltage
15 (Y/R)	Ground	Power supply for control unit (back-up)	Input	Always		Battery voltage
16 (R)	-	CAN-low	Input/Output	-		-

CAUTION: When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.