LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Rear Final Drive: Ma241 (Eld)) >> Rear Final Drive: Ma241 (Eld) >> DTC/Circuit Diagnosis >> DTC P18CB: Differential Lock Solenoid Power Supply >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

When engine is running and differential lock solenoid power supply and ignition signal voltage is higher than 9 V and differential lock mode switch ON, differences between ignition signal voltage and differential lock solenoid power supply voltage higher than 4.6 V.

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P18CB

SOLENOID POWER SUPPLY

(Solenoid power supply)

Diagnosis condition

When all of the following conditions are satisfied:

  • When Ignition switch is ON.
  • Differential lock mode switch: ON

Signal (terminal)

  • Ignition signal (terminal 7)
  • Solenoid power supply (terminal 9)

Threshold

-

Diagnosis delay time

-