LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Transfer Case) >> Removal And Installation >> Transfer Rotary Position Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Disconnect the battery or batteries. Refer to Battery Disconnect .
  3. Disconnect the harness connector from the transfer rotary position sensor.
  4. Remove the transfer rotary position sensor.
scientia non olet · About LEMON Manuals