Precautions for Axle Shaft
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following precautions when disassembling and assembling axle shaft.
- Perform work in a location which is as dust-free as possible.
- Before disassembly and assembling, clean the outside of parts.
- Prevention of the entry of foreign objects must be taken into account during disassembly of the service location.
- Disassembled parts must be carefully assembled in the correct order. If work is interrupted, a clean cover must be placed over parts.
- Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by blowing with air or wiping with paper shop cloths.
- Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint on parts.