Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK TILT SWITCH

Turn ignition switch OFF.
Disconnect ADP steering switch (tilt switch).

Check continuity between ADP steering switch terminals.

ADP steering switch (tilt switch)		Condition		Continuity
Terminals
1	4	Tilt switch (up)	Operate	Yes
			Release	No
	5	Tilt switch (down)	Operate	Yes
			Release	No

Is the inspection result normal?

YES

Inspection End.

Replace ADP steering switch (tilt switch). Refer to Removal and Installation .