DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- SELF-DIAGNOSIS WITH AUTOMATIC DRIVE POSITIONER CONTROL UNIT
CONSULT
- Turn ignition switch ON.
- Check "Self Diagnostic Result" mode of "AUTO DRIVE POS".
- Check DTC.
Is the DTC detected?
YES
Perform diagnosis procedure. Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.