LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Brake System) >> Removal And Installation >> Rear Disc Brake >> Brake Pad >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake pads to pad retainers.
    CAUTION:
    • Securely assemble the pad retainers (1) so that it will not be lifted up from the torque member (2).
      G06933696Courtesy of NISSAN NORTH AMERICA, INC.
    • Do not deform the pad retainers.
  2. Using a suitable tool, press caliper piston(s) and install brake pads to the brake caliper.
    CAUTION:
    • Do not damage the piston boot.
    • When replacing brake pads with new ones, check the brake fluid level in the reservoir tank because brake fluid returns to reservoir tank when the caliper pistons are pressed into the caliper body.
  3. Install caliper member bolts and tighten to specification.
  4. Depress the brake pedal several times then perform inspection after installation. Refer to Inspection .
  5. Install the wheel and tire. Refer to Removal and Installation .
scientia non olet · About LEMON Manuals