Removal and Installation: Notes
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- All hoses and piping (tubes) must be free from excessive bending, twisting and pulling.
- If the brake fluid contacts the brake caliper assembly and disc rotor, quickly wipe it off.
- Make sure there is no interference with other parts when turning steering both clockwise and counterclockwise.
- Do not spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it off immediately and wash with water if it gets on a painted surface.
- Do not depress the brake pedal while brake lines or hoses are disconnected.
- Do not allow foreign matter (e.g. dust) and oils other than brake fluid to enter the reservoir tank.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.