Removal and Installation - 4WD: Installation

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

NOTE: Apply grease to lower link bracket (XD Models)

Perform the final tightening of the lower link nuts at the frame and shock absorber lower side (rubber bushing) under unladen conditions with the tires on level ground.
Check the wheel alignment. Refer to Inspection .
Adjust the neutral position of the steering angle sensor. Refer to Description .