LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Front Suspension) >> Periodic Maintenance >> Front Suspension Assembly >> Inspection >> Ball Joint Axial End Play

Ball Joint Axial End Play

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: When moving the front tires up and down by hand, place a jack (A) at the rear floor jack lift point to stabilize the vehicle or the vehicle could rock and fall off the lift resulting in serious personal injury or death.
GNSJSEIA1825Z-825Courtesy of NISSAN NORTH AMERICA, INC.
  1. Set front wheels in a straight-ahead position.
  2. Check ball joint boot for cracks or other damage. If there are cracks or other damage replace transverse link.
  3. Lift the vehicle and move the tires (1) up and down by hand to check if the ball joint has a backlash. If it has a backlash, replace trans-verse link.
    NOTE:
    • If a rattling noise is generated while travelling, check ball joint axial end play.
    • If a roaring noise is generated while travelling, check if the wheel hub assembly bearing has a axial end play. Refer to Inspection .
    GNSJSEIA1826Z-826Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Do not depress brake pedal when measuring.
    • Do not perform with tires on level ground.
    • Be careful not to damage ball joint boot.