LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Control System (Introduction) (CUMMINS 5.0L)) >> System Description >> Operation >> Oil Control System >> Switch Name and Function >> Reset Operation

Reset Operation

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When an alert was displayed, change the engine oil, and reset the engine oil data.
  1. Turn ignition switch ON.
  2. On information display, select "Settings" >> "Maintenance" >> "Service".
  3. Press "ENTER" switch until "YES/NO" appears.
  4. Select "YES".
  5. Check that ----- is displayed.
scientia non olet · About LEMON Manuals