LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Control System (Introduction) (CUMMINS 5.0L)) >> System Description >> Diagnosis System (ECM) >> CONSULT Function >> Function

CONSULT Function: Function

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic test mode

Function

Self Diagnostic Result

Self diagnostic results such as DTC can be read and erased quickly.*

Data Monitor

Input/Output data in the ECM can be read.

Work support

This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT unit.

Active Test

Diagnostic Test Mode in which CONSULT drives some actuators apart from the ECMs and also shifts some parameters in a specified range.

ECU Identification

ECM part number and software/hardware levels can be read.

*: The following emission-related diagnostic information is cleared when the ECM memory is erased.

scientia non olet · About LEMON Manuals