LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Brake Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC C118E: Accumulator >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The VDC Warning Lamp, ABS Warning Lamp And Brake Warning Lamp Turns On And DTC "C118E" May Be Detected In "Self Diagnostic Result" Mode Of "ABS" When The Brake Pedal Is Excessively Operated, Such As Air Bleeding. This Is Not A System Malfunction Because This Occurs Due To The Temporary Decrease In Accumulator Fluid Pressure. The System Returns To Normal Condition When The Accumulator Fluid Pressure Reaches The Specified Pressure With The Ignition Switch On And The VDC Warning Lamp, ABS Warning Lamp, And Brake Warning Lamp Turn Off. After These Steps, ABS Self-Diagnosis Results Are Erased.

DTC

Display Item

Malfunction Detected Condition

C118E

ACCUMULATOR PRESS

When Performing Excessive Brake Pedal Operation With The Vehicle Stopped. [When Accumulator Fluid Pressure Reaches 11.43 Mpa (114 Bar, 116.6 Kg/Cm2, 1657 Psi) After Reaching 17.3 Mpa (173 Bar, 176.5 Kg/Cm2, 2509 Psi.]