Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Calibration Of Decel G Sensor
Perform Calibration Of Decel G Sensor. Refer To Work Procedure .
GO TO STEP 2 .
- Check ABS Actuator And Electric Unit (Control Unit)
consult
Select "Self Diagnostic Result" Mode Of "ABS".
Is DTC "C1160" Detected?
Yes
GO TO STEP 3 .
No
Inspection End.
- Check Yaw Rate/Side/Decel G Sensor System
- Turn The Ignition Switch Off.
- Check The Yaw Rate/Side/Decel G Sensor System. Refer To Diagnosis Procedure Or Diagnosis Procedure .
Is The Inspection Result Normal?
Yes
Replace The ABS Actuator And Electric Unit (Control Unit). Refer To Removal And Installation .
No
Replace The Yaw Rate/Side/Decel G Sensor. Refer To Removal And Installation .