LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Maintenance (CUMMINS 5.0L)) >> Periodic Maintenance >> Chassis And Body Maintenance >> Wheels >> Inspection >> Wheel

Chassis And Body Maintenance: Wheels: Inspection: Wheel

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check tires for wear and improper inflation.
  2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
  3. Remove tire from wheel and mount wheel on a balancer machine.
    G04128757Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: DO NOT use center hole cone-type clamping machines to hold wheel during tire removal/installation or balancing; damage to wheel paint, cladding or chrome may result. Use only rim-type or universal lug-type clamping machines to hold wheel during servicing.
    1. Set dial indicator as shown.
    2. Check runout. If runout value exceeds limit, replace wheel.

      Axial Runout (A)

      : Refer to Wheel .

      Radial Runout (B)

      : Refer to Wheel .
scientia non olet · About LEMON Manuals