Brake Fluid Level Adjustment After Air Bleeding

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF.
Depress the brake pedal 20 times or more.
NOTE: The pressure loss in the accumulator results in a large brake pedal stroke. In addition to this, the brake pedal depression becomes lighter in initial stage.
Adjust brake fluid level to the reservoir tank MAX line.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Do not adjust with the ignition switch ON.
Turn the ignition switch ON.
Check that the reservoir tank brake fluid level is within 6 - 14 mm (0.24 - 0.55 in) lower than the MAX line center.
NOTE: Since brake fluid is in the accumulator in pressurized condition, the reservoir tank brake fluid level should be lower than the MAX line.